WAP: Are You Ready?

• Select "Menu"
• Scroll down to the
  "Services" menu (Menu 10)
• Press the Navi (TM) Roller and
  select the "Settings" option.
• Select "Connection
  Settings"
• Select "Set 1"
  ("Set 2" if you are adding a second setting)
• Press "Options" and
  select "Edit"
• Homepage: Type in the
  URL address of the homepage you want to access
• Connection Type: Choose
  "Continuous".
• Connection Security:
  Select "Off"
• Bearer: Select
  "data"
• Dial-up Number: Type
  the number specified by the WAP service provider or
  
  the dial-up number of an ISP
• IP Address: Type the IP
  number of the WAP gateway/server you are accessing
• Authentication Type:
  Choose "Normal" unless specified by your service
  
  provider to choose "Secure"
• Data Call Type: Select
  "Analogue"
• Data Call Speed: Choose
  "Autobauding"
• User Name: Type the
  user name provided by mobile operator or your ISP
• Password: Type password
  provided by mobile operator or your ISP
• Press "Back" to
  reach the Connection Settings Menu. The "Set" you
  would
  
  have configured would be highlighted. Press
  "options" and "Activate" this
  
  set.
• Press Back and come to the
  Service Options Menu. Select "HOME" for
  
  accessing the WAP site you have just configured.

Note: The above
configurations are only to be done once, i.e., the first time
that you are configuring the settings. Each time you access the
WAP site you need to repeat only step 12 & 13.

Configuring Ericsson R320s for WAP Access

Configuring
Ericsson R320s for WAP Access

WAP Profile setting:

• Scroll to "WAP
  Services", press "Yes"
• Scroll to "WAP
  Settings", press "Yes"
• Scroll to the WAP profile
  whose access type you want to edit. Press "Yes"
• Scroll to Access Type, press
  "Yes", Always ask, press "Yes"

If you want to be asked which
access type to use each time you start the browser, select
"On". Otherwise select "Off"

• Press "Yes"
• Select either "GSM
  Data" or "SMS" to be the access type you want
  to use with this WAP profile

GSM Data Connection setting:

• Scroll to WAP Services, press
  "Yes", WAP settings, press "Yes"
• Scroll to the WAP profile for
  which you want to use a GSM Data Connection and press
  "Yes"
• Scroll to "Gateway",
  press "Yes", "User ID", press
  "Yes"
• Enter the User ID to your
  gateway and press "Yes"
• Scroll to "Password"
  and press "Yes"
• Enter the Password to the
  gateway and press "Yes"
• Scroll to "Data
  Address" and press "Yes"
• Enter the IP address to your
  gateway and press "Yes"

If IP number is say 123.4.67.901,
you will have to enter 123.004.067.901, prefixing "0s"
in case of groups consisting of less than three numerals.

• Press "No"
• Scroll to "GSM Data"
  and press "Yes"
• Scroll to "Phone
  Number" and press "Yes"
• Enter the phone number you
  should use with your GSM Data connection and press
  "Yes"
• Scroll to "User ID"
  and press "Yes"
• Enter the User ID to your GSM
  Data connection or ISP connection and press "Yes"
• Scroll to "Password"
  and press "Yes"
• Enter the Password to your GSM
  Data connection or ISP connection and press "Yes"
• Scroll to Data Type and press
  "Yes"
• Select whether you want to use
  Analogue or ISDN connection
• Scroll to "Inactive
  Timeout" and enter how many seconds the browser should
  remain idle while connected before it asks you to remain
  either connected or if it should be disconnected.
  
  Press "Yes"